Adapty Seat information will appear here soon.
In most cars it is possible to extend the vehicles adjustable seat runners, Raise or Lower the seats and adapt the seats to powered motion back and forth. This can be especially useful if you need to load a manual wheelchair across yourself once seated in the car to gain space temporarily. This will not interfere with the adjustments already available from the car manufacturer.
With Carony you can move in and out of the vehicle without actually needing to rise from the seat. It’s the seat itself that moves from the wheelchair wheel unit to the swivel base inside the car. It’s easy and comfortable for both the passenger and the person assisting.
The low built seat is crash tested and fulfils current vehicle regulations and the passenger travels safely strapped by the vehicle seatbelt. Carony is available with two different wheel alternatives: 12″ rear wheels, which is a transport wheelchair for those unable to drive themselves and with 24″ drive wheels, for those who can. The compact wheel unit is stored in the boot when not in use.
For vehicles with a higher step up, such as MPV vehicles etc., Carony can be combined with the car seat lift Turny.
The Discovery Seat is aimed at the larger saloon car, MPV and 4×4 type vehicles and is available with a drop of 390mm. A 410mm model is also available. The Discovery Seats 3 way programming allows easy access. The seat rotation is programmed via laptop to move forwards, backwards and sideways so that it hugs the B Pillar creating maximum legroom. With the Traveller combination it allows you to utilise the wheelchair transfer features in a “taller and higher” vehicle such as an MPV or 4×4. The wheelchair transfer works by allowing the seat to slide onto a bespoke height-adjustable wheelchair base for the carer to push. Armrests are standard with optional lumbar support and memory foam available.The rotating car seat is available in four variants depending on the specific users requirements. Armrests are available as an option providing that security when necessary and are adjustable in their rake angle. The original seat can be refitted when required and no modification is made to the vehicle.
The Turnout is a swivel base that is installed in the floor attachments of the vehicle’s original seat. To preserve a suitable seat height inside the vehicle the Turnout shall be combined with a low profile seat, such as the BEV-seat or the Recaro Specialist L seat. It is not recommendable to use the original seat with the Turnout. Turnout is available in a manual version, or in a powered version, operated by a hand held control. By choosing a powered Turnout you can better focus on getting the feet over the sill while swiveling.
This rotating seat is similar to the Turny Orbit, the Turny Evo is an electrically powered seat which can swivel out of the vehicle and can be electrically raised or lowered. The Evo has an informative display on the handset and its movement is programmable meaning that it can be optimised for the user and leg room can be maximised. The Evo seat back support can be reclined fully if required.
This seat can be mounted in the front passenger or driver position but can also be fitted in the centre row of a vehicle depending on the car model.
Due to the programming capabilities this seat is the most suitable type available for drivers side installations.
This seat is also compatible with a Carony wheelchair transfer system.
Changes to the car are minimal and can easily be restored to original when the car is being replaced.
Makes it easy getting into and out of the car, by bringing the entire car seat out of the vehicle for easy access.
The Turny swivels the car seat out through the door opening and lowers it to a suitable position for transfer to or from a wheelchair.
The Turny Orbit has electrically operated swivelling, lifting and lowering. All movements of Turny Orbit are operated by a hand-held control.